1
/ 15 Document
s
Added to Project
15
/ 15 Documents Added. Remove a document to add more to your project.
CEN-SWPOE-26
Quick Installation
Easily mount the CEN-SWPOE-26 in a lighting enclosure or 19 in. rack to provide an Ethernet connection with no configuration required. A Web browser interface and an advanced command line are available for complex systems.
Power Over Ethernet+
PoE+ is supplied simultaneously across 24 ports, providing a centralized power source for numerous PoE+ powered devices and eliminating the need for cumbersome power supplies and extra wiring. Up to 30 W is provided per port up to a combined maximum output of 300 W.
Ethernet
Ports
(2) 10/100/1000Base-T auto-sensing Gigabit Ethernet
(24) 10/100/1000Base-T auto-sensing Gigabit Ethernet w/PoE+
(4) 10 Gigabit Base-X SFP+
Network Standards
IEEE 802.3af, 802.3at
MAC Addresses
Up to 16K Switch
Fabric 60 Gbps non-blocking
Lite Layer 3 Package
Management
Out-of-band; IT Web GUI (main); HTTPs, CLI, Telnet, SSH; SNMP, MIBs, RSPAN; Radius users, TACACS+
IPv4/IPv6 ACL and QoS
Ingress/egress; 1 Kbps shaping, time-based; Single rate policing
IPv4/IPv6 Multicast Filtering
Automated IGMP between switches; IGMPv3 MLDv2 snooping, proxy ASM and SSM; IGMPv1, v2 querier (compatible with v3); Control packet flooding
IPv4/IPv6 Policing and Convergence
Auto-VoIP; Policy-based routing; LLDP-MED; IEEE 1588 PTPv2
IPv4/IPv6 Authentication Security
Successive tiering (DOT1X, MAB, Captive portal); DHCP snooping; Dynamic ARP inspection; IP source guard
IPv4/IPv6 Static Routing
Port, subnet, VLAN routing; Multicast static routes; DHCPv4 server; DHCP relay; Stateful DHCPv6 Server
IPv4/IPv6 Dynamic Routing
IPv4: RIP; IPv4/IPv6: PIM-SM, PIM-DM, SSM
Spanning Tree Green Ethernet
STP, MTP, RSTP; PV(R)STP; BPDU/STRG; EEE 802.3az
VLANs
Static, dynamic, voice, MAC; GVRP/GMRP; Double VLAN mode; Private VLANs
Indicators
POWER
(1) green LED, indicates operating power supplied via main power input
FAN
(1) green LED, indicates fan is in operation
PoE MAX
(1) green LED, indicates the unit is supplying the maximum amount of PoE OOB (2) green LEDs for Ethernet port, indicates Ethernet link status for out-ofband (service) port
1-24
(2) LEDs per each (24) Ethernet port, left (green) LEDs indicate Ethernet link status for each corresponding port, right (blue) LEDs indicate PoE for each corresponding port
25-26
(1) green LED per each (2) Ethernet port, indicates Ethernet link status for each corresponding port.
27-30
(1) green LED per SFP+ port, indicates active connection
Connectors
OOB
(1) 8-wire RJ45, female; 10/100/1000Base-T Ethernet port
1-24
(24) 8-wire RJ45, female; 10/100/1000Base-T Ethernet ports and PoE Power Sourcing Equipment (PSE) outputs; Supports IEEE 802.3at Type 2 PoE+ power sourcing from any ports up to the maximum specified power capabilities; Maximum 30 Watts per port, 300 Watts total
25-26
(2) 8-wire RJ45, female; 10/100/1000Base-T Ethernet ports.
27-30
(4) SFP ports, female; 1 Gigabit Base-X SFP
Power Requirements
Main Power
4.4 Amps @ 100–240 Volts AC, 50/60Hz
Power Consumption
Max PoE: 401 W No PoE: 35.8 W Standby: 23.4 W
Environmental
Temperature 32° to 122° F (0° to 50° C)
Humidity 10% to 90% RH (non-condensing)
Ambient Noise 34 dB at 77° F (25° C)
Construction
Chassis
Metal, black finish, fan-cooled, vented sides
Mounting
Freestanding or 1U 19-inch rackmountable with reversible rack ears
Dimensions
Height 1.7 in. (43.2 mm)
Width 17.32 in. (440 mm)
Depth 10.11 in. (257 mm)
Weight 9.47 lb (4.3 kg)
Compliance CE
