Zūm® Battery-Powered Wireless Keypad, 6-Button,

Wireless Communications
RF Transceiver: Zūm Mesh 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
Range: 50 ft (15 m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities [3]
Note: A maximum of 32 Zūm Mesh wireless devices, inclusive of a maximum of 8 battery-powered keypads, is permitted per room.

Controls & Indicators
Switch (-KP10ABATT models): (1) 3-Position rocker switch (spring return to center); press up to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]), press down to turn all lighting loads off, press and hold up or down to raise or lower the dimming level for all dimmable lighting loads; also used for creating a preset, room setup, and factory reset
Buttons (-KP10BBATT models): (4) Pushbuttons as follows:
ON: Press to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]), press and hold to raise the dimming level for all dimmable lighting loads
SCENE 2: Press to recall the Scene 2 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 2 preset
SCENE 3: Press to recall the Scene 3 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 3 preset
OFF: Press to turn all loads off, press and hold to lower the dimming level for all dimmable lighting loads
Buttons are also used for creating presets, room setup, and factory reset
Buttons (-KP10CBATT models): (6) Pushbuttons as follows:
ON: Press to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]): Press to raise the dimming level for all dimmable lighting loads: Press to lower the dimming level for all dimmable lighting loads
SCENE 2: Press to recall the Scene 2 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 2 preset
SCENE 3: Press to recall the Scene 3 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 3 preset
OFF: Press to turn all loads off, press and hold to lower the dimming level for all dimmable lighting loadsButtons are also used for creating presets, room setup, and factory reset
Buttons (-KP10DBATT models): (6) Pushbuttons as follows:
ON: Press to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]): Press to raise the dimming level for all dimmable lighting loads: Press to lower the dimming level for all dimmable lighting loads
SCENE 2: Press to recall the Scene 2 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 2 preset
SENSOR DISABLE: Press to disable all room occupancy/vacancy and daylight sensors for one hour, press and hold to re-enable the sensors
OFF: Press to turn all loads off, press and hold to lower the dimming level for all dimmable lighting loads
Buttons are also used for creating presets, room setup, and factory reset
Buttons (-KP10FBATT ENGRAVED models): (4) Pushbuttons with custom engraving. Functionality is identical to the –KP10BBATT version.[2]
Buttons (-KP10GBATT ENGRAVED models): (6) Pushbuttons with custom engraving. Functionality is identical to the –KP10CBATT version.[2]
Feedback: (1) Bi-color LED, green indicates a button press, red indicates a low battery condition when a button is pressed; also used for creating presets, room setup, and factory reset

Power
Battery: (1) CR2032 3 Volt lithium coin cell disposable battery (included)
Battery Life: ≥5 years

Environmental
Temperature: 32° to 104° F (0° to 40° C)
Humidity: 10% to 90% RH (non-condensing)

Construction
Composition: Plastic; almond, black, white, gray, or red smooth finish
Surface Mounting: Adheres to a smooth, flat wall surface using double sided tape (included) or screws (not included)
Wall Box Mounting: Mounts to a 1-gang (or larger) electrical box
Faceplate: Requires a decorator-style faceplate (sold separately)

Dimensions
Height: 4.26 in (109 mm)
Width: 1.76 in (45 mm)
Depth: 0.42 in (11 mm)

Weight
2.3 oz (65 g)

Compliance
UL Listed for US & Canada, IC, FCC Part 15 Class A digital device, UL 916,CEC Title 24 [4], ASHRAE 90.1 [5], IECC [6]