1
/ 15 Document
s
Added to Project
15
/ 15 Documents Added. Remove a document to add more to your project.
4 channels of dimmingPhase-Synchronous Detection Circuitry 120 to 277 Volt 50/60 Hz operationVisit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.
An extremely slim, battery-powered wireless keypad for controlling Zūm® J-Box Load Controllers. Can be mounted to an electrical box or directly to any flat wall surface.
A low-profile, ceiling-mounted occupancy sensor designed for large areas up to 2,000 square feet. Passive infrared motion sensing affords excellent motion-detection while also providing superior immunity to false triggering. Reliable Cresnet® connectivity allows for direct connection to a Crestron® control system for integrated control of lighting, climate control, and other devices in the room.
The HZ‑DIMUEX is a Horizon™ in‑wall universal phase dimmer that controls LED, incandescent, magnetic low voltage, and electronic low voltage loads. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations. Faceplate Sold Separately
CAEN-CK Cover Kits are designed to extend the depth of Crestron's CAEN and CAENIB Automation Enclosures, affording 1.5 inch (3.81 cm) additional depth to accommodate excess wiring and third-party devices.
An alternate decorative cover for STEINEL IS-345-24, IS 3180-24, and IS 3360-24.
Designed to be installed in CAEN or CAEN-MLO automation enclosures to facilitate the termination of wiring for the CLX-2DIMFLV8 0-10 Volt 8 Channel Dimmer Module, 2 Feeds.
A line voltage, Passive Infrared (PIR) wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces.
Provides Cresnet® connectivity for Crestron GLS-series and third-party sensorsWorks with occupancy sensors, photocells, partition sensors, and moreProvides 24 Volts DC to power one or more sensors
Set and recall scene presets, control multiple lighting zones, toggle multiple channels, and turn on or off loads connected to a GLPP.
Utilizes passive infrared and ultrasonic technologies to detect the presence of a person in a space. Lighting loads are controlled in relation to both presence detection and ambient light levels.
A line voltage, single relay, Passive Infrared (PIR) wall switch occupancy sensor to control lighting in commercial spaces. The photocell daylight option keeps the lighting load off if the light level is greater than the threshold level setting.
A stylish and versatile wall mount touch screen featuring web browsing, Crestron HTML5 and Smart Graphics® software technology, custom‑programmable icons, H.265/H.264 streaming video, a Rava® SIP intercom, Wi‑Fi network® connectivity, and PoE+ (Power over Ethernet Plus) network power. Built‑in applications are provided for room scheduling, conferencing, and home control.
A raintight indoor/outdoor occupancy sensor intended for ceiling mounting.
Provides a DIN-rail mountable thermostat for multizone radiant heating systems. Works with Crestron remote temperature sensors and integrates with a Crestron® control system via Cresnet®. Provides relay control of eight heat zone valves and one main valve. Rated 1/2 HP at 240V AC.
<ul> <li>Green Light Express® modular relay</li> <li>Single pole switching</li> <li>Supports 120, 230, 277 & 347 Volt applications</li> </ul>
Provides a convenient pre-assembled lighting control cabinet for commercial lighting applications that do not require scheduling.
Zūm® Wired junction box mounted power supply with Zūm® Link communication. Part of a complete Zūm wired commercial room lighting system.
An extremely slim, battery-powered wireless keypad for controlling Zūm® J-Box Load Controllers. Can be mounted to an electrical box or directly to any flat wall surface.
The HZ‑AUX is a Horizon™ in‑wall multiway remote that controls Horizon‑style dimmers and switches. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations. Faceplate Sold Separately
The CLW-DIMUEX-P is a Cameo® in-wall universal phase dimmer that controls LED, incandescent, magnetic low voltage, and electronic low voltage loads. Its design matches the entire line of Cameo devices, making it a great addition to new or retrofit installations.
Gives the installer the ability to set basic functions of the entire line of the Control Pro Series of sensors via remote control.
A line voltage, single relay, Ultrasonic wall switch vacancy sensor to control lighting in commercial spaces.
A Zūm® Wired junction box-mounted load controller with Zūm® Link communication designed to provide intelligent lighting control as part of a complete Zūm wired commercial room lighting system.
Wall mount switches with up to three large momentary buttons for use with low-voltage controllable STEINEL lighting products.
A low-profile, ceiling-mounted occupancy sensor designed for large areas up to 2,000 square feet. Dual-technology motion sensing affords extreme motion-detection reliability.
A Zūm® Wired junction box-mounted load controllers with Zūm Link communication designed to provide intelligent lighting control as part of a complete Zūm wired commercial room lighting system.
Provides multiple button configurations for Zūm® Wired ZUMLINK‑KP keypads. White, black, almond, gray, and red finishes offered with standard pad-printed labels, custom engraving or blank buttons.
An AC-powered wireless keypad for controlling Zūm® J-Box Load Controllers.
The GL-IPAC-SW8 switching panel provides internal controls for 8 circuits of switched load and is expandable to support up to 64 circuits of switched load by adding external panels and switching modules. It features local inputs for sensors and keypads, along with a LCD user interface where installers or users can set up the system without having to connect to a computer.
The GLPAC-DIMFLV is a Crestron Green Light® integrated lighting system designed for use as a standalone lighting controller in classrooms, conference rooms, and offices.
An optional protective wire guard cage for some sensors.
The CLWI-DIMUEX delivers Crestron® dimming control to any light in new or retrofit 230 Volt applications. It features engravable and field-customizable buttons, wireless infiNET EX® communications, and connectivity for third party remote switches. Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.
Provides four channels of technologically advanced, high-power universal dimming for 120 Volt residential and commercial lighting applications. Supports LED, incandescent, magnetic low-voltage, electronic low-voltage, and 2-wire dimmable fluorescent lighting loads. Installs in a CAEN or CAEN-MLO wall mount automation enclosure as part of a complete Crestron® centralized lighting control system.
Ultrasonic presence detector with Zūm® Link communication. Uses presence detection and daylight sensing to maximize energy savings. Optional additional relays to control a relay-input capable device.
Zūm® battery-powered, wireless, open-loop photocell daylight sensor designed to provide superior sensing of natural light and control of indoor lighting for daylight harvesting applications.
A low voltage Ultrasonic, PIR or Dual Technology Presence Detector (40 kHz) that utilizes STEINEL’s state of the art signal processing to provide superior detection. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated force off photocell to maximize energy savings.
A line voltage, Ultrasonic (40 kHz) wall switch vacancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces.
A line voltage, Ultrasonic (40 kHz) wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces.
Provides a control system with a powerful 4‑Series™ control engine and numerous integrated control ports designed specifically for DIN rail mounting applications. Serves as the core processor for controlling a complete DIN rail automation system.
A line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor to control lighting in commercial spaces. The photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting.
A wireless wall-box dimmer for 120-277 Volt load control of dimmable electronic low-voltage halogen or LED, incandescent, tungsten-halogen, electronic CFL, and 2-wire fluorescent ballasts in a Zūm® commercial lighting system.
The GLPPA-IRGW-F IR Gateway is a 1-way infrared receiver designed for use with Crestron Green Light® Power Pack systems.
Lighting and plug load power pack that provides power to low voltage occupancy sensors and other control devices.
A line voltage, single relay, Passive Infrared (PIR) wall switch vacancy sensor to control lighting in commercial spaces.
8 Channel 0-10V Dimmer Module w/Terminal Block, 2 Feeds, 120V or 277V
The HZ‑DIMEX is a Horizon™ in‑wall forward phase dimmer that controls incandescent, magnetic low voltage, and tungsten‑halogen loads. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations. Faceplate Sold Separately
