Heating, Cooling, and Relative Humidity Thermostat, DIN Rail Mount

The DIN‑THSTAT is a versatile heating, cooling and relative‑humidity thermostat that provides control of radiant floor heat, forced air, and heat pump HVAC systems. DIN rail mounting allows for installation in an equipment cabinet, keeping the living area free from a wall‑mounted thermostat. Small, unobtrusive remote temperature and humidity sensors1 gather the environmental conditions from the room and transmit the data to the DIN‑THSTAT.

A Crestron control system connection allows temperature adjustments from virtually anywhere by using a Crestron touch screen, handheld remote, mobile app, or computer.

Remote Sensors
The CHV‑RTS and CHV‑RTHS remote sensors provide indoor temperature and humidity data so that the DIN‑THSTAT can be installed out of view. The CHV‑RSS monitors outdoor climate and floor temperature, enabling outdoor low-temperature compensation to prevent condensation on windows during cold weather. The DIN‑THSTAT accepts up to three temperature sensors. Each sensor connects via a single twisted pair wire.

Auxiliary Ports
Auxiliary ports allow state sensing from HVAC equipment and interfacing with additional HVAC devices.

DIN Rail Mounting
The DIN‑THSTAT snaps onto a standard DIN rail for installation in a wall mount enclosure (Crestron DIN‑EN series or similar1) or on a wall panel. The DIN‑THSTAT is designed to mount in a DIN‑EN‑2X18‑HC‑OPEN, DIN‑EN‑3X18‑HC‑OPEN, or DIN‑EN‑6X18‑HC‑OPEN for an attractive centralized mounting solution. The hinged cover provides easy access to equipment wiring while openings in the cover provide access to the DIN modules through the cover.

Cresnet Communications
The DIN‑THSTAT communicates with a Crestron control system (such as the DIN‑AP3) via the Cresnet control network. A pair of Cresnet ports is provided on the DIN‑THSTAT to allow easy daisy‑chaining of several DIN‑THSTAT or Crestron DIN rail devices.

1. Item(s) sold separately.
2. Outdoor temperature measurement is -30° to 120° F (-34° to 49° C) if thermistor sensors are used.
3. The setpoint range can be decreased during device configuration.
4. Each temperature sensor requires a dedicated low-capacitance twisted pair wire (<7 nF per run) and supports a wire length of 500 ft (152 m) using CAT5. Thermostat wire is not recommended, but may be used if necessary at lengths up to 100 ft (30 m).

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, 3‑Series, Cresnet, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.