1
/ 15 Document
s
Added to Project
15
/ 15 Documents Added. Remove a document to add more to your project.
GLXP-SW16-LP
The Crestron® GLXP‑SW16‑LP is a Crestron Green Light® switching module which features 16 independent channels of power switching with mechanically‑latching relays. Each channel is rated to control a 16 A lighting load or 1 HP motor.
Override Input
Send an override signal from the control system to set all output channels to their preset override level. Override mode can also be triggered from the front-panel of the GLXP‑SW16‑LP. Override levels can be adjusted and saved using the front-panel controls or via software.
Cresnet® Communications
The GLXP‑SW16‑LP communicates with a Crestron control system using the Cresnet control network. A pair of Cresnet ports are provided on the GLXP‑SW16‑LP to allow easy daisy‑chaining of several Crestron devices.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How‑To‑Buy/Find‑a‑Representative or by calling 855‑263‑8754.
Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at www.crestron.com/about/partner‑info/commercial‑lighting‑consultants. For assistance with incorporating this product into a design or specification, please contact the Commercial Lighting Consultant Hotline via email at clcdesign@crestron.com or by calling 888-330-1502.
The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.
Crestron, the Crestron logo, Crestron Green Light, and.Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2019 Crestron Electronics, Inc.
Load Ratings
Switch Channels: 16
Per Channel: 16 A @ 100–277 VAC, 50/60 Hz;0.5 HP @ 120 VAC, 1 HP @ 230 VAC, 1 HP @ 277 VAC
Switch Load Types : Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent Ballast, High-Intensity Discharge, LED, Motor
Relay Lifetime: Resistive rating: 100,000 on/off operations,50 A @ 277 VAC; General rating: 50,000 on/off operations, 16 A @ 120/277 VAC
Power Requirements
Primary: 100–277 VAC, 50/60Hz, supplied via channel 1 (L1, N1)
Secondary (optional): 5 W @ 24 VDC, supplied via Cresnet®
Connectors
NET: (2) 5-pin headers;Connect to adjacent module or internal connecting block using interconnect cable (block and cable provided)
N1: (1) terminal block; Line input neutral;Accepts 14–10 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
L1-L16: (16) terminal blocks; Line power inputs; Accepts 14–10 AWG wire;Torque to 4.43 lb-in. (0.5 Nm)
SW1-SW16: (16) terminal blocks;Switch channel outputs; Accepts 14–10 AWG wire; Torque to 4.43 lb-in. (0.5 Nm)
Controls and Indicators
NET ID: (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID
SETUP: (1) Red LED and (1) recessed miniature pushbutton forenabling setup mode and touch-settable ID (TSID)
OVR: (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
PWR: (1) Green LED; solid illumination indicates line power is applied to N1 and L1; Flashing indicates Cresnet power is supplied in absence of linepower
NET: (1) Yellow LED; indicates communication with control processor
RESET: (1) Recessed miniature pushbutton, resets internal processor
ON/OFF: (16) Red LEDs and (16) miniature pushbuttons for individual manual channel activation
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (noncondensing)
Heat Dissipation: 136 Btu/h
Construction
Mounts in a GLEX series enclosure using integral mounting flanges
Dimensions
Height: 11.07 in. (281 mm)
Width: 9.5 in. (241 mm) including mounting flanges
Depth: 3.07 in. (78 mm) including standoffs
Weight
7.0 lb (112 oz)
Compliance
UL®508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts);
UL924, Emergency Power Equipment;
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or other capacitive loads);
SCCR Rating - 18kA;
CE
