CLWI-DIMUNEX-ANTH
The CLWI-DIMUNEX delivers Crestron® dimming control to any light in new or retrofit 230 Volt applications. Featuring robust infiNET EX® wireless technology, the CLWI-DIMUNEX can be installed in virtually any location thanks to reliable mesh networking. Universal dimming provides automatic compatibility with both forward- and reverse-phase loads.
Field-Replaceable and Engravable Buttons
The CLWI-DIMUNEX features engravable buttons that can be swapped out in the field. Any change in room décor or functionality is easy to handle long after the dimmer or switch has been installed. Positive snap-on fittings require no tools. Configure the dimmer or switch with a large rocker or any combination of up to two adjacent half-size rockers or triple button pad. Each CLWI-DIMUNEX ships with a full assortment of blank buttons as well.
Integrated Keypad
Because the CLWI-DIMUNEX is attached to the Crestron network, it can also function as a keypad, sending commands to trigger whole-room lighting scenes or distributed audio functions. Supporting up to six buttons, the in-wall dimmer or switch serves as a great control interface in any Crestron system. Its single-box form factor maximizes control capability in a small space while increasing the opportunity for Crestron control in every room. Also available are aesthetically-matched standalone keypads that use Cresnet® or infiNET EX communications.
infiNET EX
Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.[1]
The CLWI-DIMUNEX communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-GWEXER, DIN-AP3MEX, or MC3[2]). Up to 100 infiNET EX devices may coexist on a single wireless network, and every non-battery-powered device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths[1]. Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves.
Streamlined Installation
In addition to field replaceable buttons, the CLWI-DIMUNEX features screw-clamp connectors for simplified wiring and reduced installation time and material costs. So slim, the CLWI-DIMUNEX can be installed in square gang boxes making them the perfect choice for both new and retrofit projects.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.
Crestron, the Crestron logo, 3-Series, 3-Series Control System, Cresnet, Crestron Green Light, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.
Load Ratings
Load Types: Incandescent, Tungsten-Halogen, Magnetic Low Voltage, Dimmable CFL, Electronic Low Voltage, Phase Control Dimmable LED
Maximum Load Per Channel: 450 VA/Watts
Minimum Load Per Channel: 15 Watts
Power Requirements
220-240 Volts AC, 50/60 Hz, line power
Controls
Buttons: Configurable for 1 rocker (up/down), or any combination of up to 2 small rockers and/or 2 three-button pad; Maximum layout contains 6 buttons; Each press configurable for up to 3 discrete functions via single click, double click and hold; programmable via control system
Dimming Ramp Rate: 5 seconds (default), software adjustable 0.01 to 10seconds
Preset Fade Time: 2 seconds (default), software adjustable 0.01 to 120 seconds
LED Indicator
Feedback: Up to (10) White LEDs, depending on button configuration
Wireless
RF Transceiver: infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
Range (typical): 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s);Subject to site-specific conditions and individual device capabilities[1]
Gateway: Requires an infiNET EX gateway[2]
Connections
Live: (1) 14-12 AWG (1 x 1.5 – 2.5 mm2), screw terminal, line power input
Neutral: (1) 14-12 AWG (1 x 1.5 – 2.5 mm2), screw terminal, neutral connection
Dimmed Live: (1) 14-12 AWG (1 x 1.5 – 2.5 mm2), screw terminal, loadoutput
Ground: (1) screw post, ground
Environmental
Temperature: 32° to 104° F (0° to 40° C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
1-gang mountable in a 35 mm deep square or round electrical box in horizontal or vertical positioning; Requires faceplate (not included)[3]
Dimensions
Height: 2.80 in (72 mm)
Width: 2.80 in (72 mm)
Depth: 1.24 in (32 mm) including front face w/ buttons
Weight
3.0 oz (85 g)