1
/ 15 Document
s
Added to Project
15
/ 15 Documents Added. Remove a document to add more to your project.
ZUMNET-DIN-DLI
The Zūm® wired DALI-2™ certified ZUMNET-DIN-DLI provides DALI® control for drivers and devices. The device can be wired to Zūm devices for network expansion and to Zūm Link devices for in-room control. Energy-saving options are available to enable daylighting, occupancy or vacancy sensing, and centralized monitoring and management. Room setup can be accomplished quickly through the Zūm app.
DALI-2™ Certified and IEC 62386 Compliant
DALI® interface for systems that provides control of one DALI loop. Capable of controlling DT6 and DT8 DALI devices.
Zūm Net Wired Technology
In a Zūm network, Zūm Net load controllers facilitate communications between rooms via Ethernet and can be daisy-chained for network expansion. Each device in the chain communicates to a Zūm Hub control system for centralized monitoring, management, and reporting. Zūm Link devices connect to Zūm Net devices to provide in-room lighting control. Zūm Link devices work together in a local ecosystem to provide customized solutions.
Zūm Link Wired Technology
Zūm Link technology enables in-room lighting control through keypads and sensors wired to controllers. Zūm Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold separately) to RJ-45 ports to provide simple daisy-chaining and lighting control of compatible loads. The Zūm Wired devices work together in a local ecosystem to provide customized solutions using the Zūm app.
Energy Efficiency
Occupancy sensor, vacancy sensor, and daylight sensor connectivity enables significant energy savings. To reduce energy usage, lights turn off automatically when the room is vacant and dim gradually depending on the amount of natural daylight in the room.
DIN Rail Mounting
DIN rail Zūm devices snap onto a standard DIN rail for installation in a wall mount enclosure (Crestron DIN-EN series or similar) or on a wall panel.
Override Contact Closure Input
An integrated contact closure provides the means to place all connected Zūm Net and Zūm Link devices into Emergency Override mode.
Specifications
Load Control
DALI Load Types Control of DALI compliant dimmable LED loads
DALI Groups 16
DALI Drivers 64
DALI Bus Power Supply Maximum: 0.23A; Guaranteed: 0.17A
Line Voltage 100-277VAC, 50/60 Hz
Switch Rating 16A 100-277VAC, 50/60 Hz; 1 HP @ 120-277VAC
Switch Lifetime General Rating: 100,000 on/off operations, 16A @ 277VAC; Motor Rating: 100,000 on/off operations, 1HP @ 120/230/277VAC;
Zūm Link Power Bus Requirements
Max Current Consumption 70mA With one DALI driver (2mA), without sensor terminal 190mA With 64 DALI drivers (128mA), without sensor terminal
Max Allowable Sensor Terminal Current 85mA Passthrough from Zūm Link bus
Wired Communications
ZUMNET (2) RJ-45 ports; Input for control system connection or Zūm Net device; Output for Zūm Net device daisy-chaining
ZUMLINK (2) RJ-45 ports; In-room Zūm Link device daisy-chaining
24V, OCC, GND Occupancy sensor input; Spring clamp connector; Each terminal accepts one 20-24 AWG solid wire
24V, PHO, GND Photo sensor input; Spring clamp connector; Each terminal accepts one 20-24 AWG solid wire
OVR, GND Override control input; Spring clamp connector: Each terminal accepts one 20-24 AWG solid wire
Controls and Indicators
TEST (1) Pushbutton and (1) green LED; Push to toggle the switched load output on and off; Press and hold to cycle the dimming level up and down; LED indicates that the load is turned on; LED lights and flashes during room setup and factory reset
ZUMLINK Status (1) bi-color green/red LED; LED lights green in normal operation; LED lights red when a fault is detected
ZUMNET Status (1) bi-color green/red LED; LED lights green in normal operation; LED lights red when a fault is detected Connections N, L, SW (Neutral, Line, Switch) (1) 3-pin terminal block; Each terminal accepts one 12-24 AWG wire DA-, DA+ (2) DALI input/output negative (DA-) and positive (DA+) Spring clamp connector Each terminal accepts one 14-24 AWG solid wire or 12-24 AWG stranded wire
Environmental
Local InCabinet Air Temperature 32° to 131°F (0° to 55°C)
Humidity 10% to 90% RH (noncondensing)
Heat Dissipation 5 BTU/hr @ 2mA DALI Loading, 0A passthrough; 7 BTU/hr @ 128mA DALI Loading, 0A passthrough; 14 BTU/hr @ 128mA DALI Loading, 16A passthrough
Construction
Light gray polycarbonate housing with polycarbonate label overlay, 71 mm DIN rail mount, occupies 4M DIN module spaces, DIN 43380 for factor for enclosures with 45 mm front panel cutout
Dimensions
Height 3.69 in. (94 mm)
Width 2.79 in. (71 mm)
Depth 2.32 in. (59 mm)
Weight 4 oz (133 g)
Compliance
Regulatory Model: M202231001 Intertek® Listed for US & Canada, CE, FCC Part 15 Class B, IC, WEEE, IEC 62386, DALI-2 certified
Model
ZUMNET-DIN-DLI DIN Rail Controller with DALI® Drivers, 100-277V for Zūm® Lighting Control with Net and Link Communication
